However, audit log data might still be output regardless of the above
conditions if, for example, an HDLM utility is executed from external media.
#:
The following audit log data is output:
¢
¢
Note:
¢
Destination and Filtering of Audit Log Data
Audit log data is output to event logs.
You can also filter the audit log output by specifying a severity level and type
for the HDLM command's set operation.
Filtering by severity:
The following table lists the severity levels that can be specified.
Severity
Filtering by category:
The following categories can be specified:
¢
¢
¢
¢
For details on how to specify audit log settings, see
Functions on page
Categories: StartStop, Authentication, and ConfigurationAccess
Severity: 6 (Error, Warning, or Information)
You might need to perform operations such as changing the log size
and backing up and saving collected log data, because the amount of
audit log data might be quite large.
Table 2-11 Severity Levels That Can Be Specified
Audit log data to output
0 Error
1
2
3
4 Error and Warning
5
6 Error, Warning, and Information
7
StartStop
Authentication
ConfigurationAccess
All of the above
3-70.
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Correspondence with event
log type
Error
Warning
Information
Setting Up the HDLM
#
2-41