Hitachi XP P9500 User Manual page 289

Message ID
KAPL01016-W The target CHA port was not
found. Operation name =
aa...aa
KAPL01018-W The target device was not
found. Operation name =
aa...aa
KAPL01019-W The target path was not found.
Operation name = aa...aa
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Message Text
Messages
Explanation
operation, see view (Displays
Information) on page
Details
The path ID indicated by -pathid
and required by the -cha
parameter is not an object of
HDLM management.
aa...aa: offline or online
Action
Execute the view operation of the
HDLM command (dlnkmgr view -
path), and then check the value
displayed in ChaPort. Specify an
AutoPath_ID that passes through
the relevant CHA port, and then
retry. For details on the view
operation, see view (Displays
Information) on page
Details
The specified host device name
could not be found.
aa...aa: view
Action
Execute the view operation of the
HDLM command (dlnkmgr view -
path) to check the value displayed
in HDevName. Specify a host device
for the value of HDevName, and
then retry. For details on the view
operation, see view (Displays
Information) on page
Details
aa...aa: offline, online, or view
offline/online operation
¢
The specified path does not
exist.
view operation
¢
The paths have not been
configured because creation
of the HDLM environment or
configuration changes to the
HDLM operating environment
have not finished.
Action
offline/online operation
¢
Use the view operation of the
HDLM command (dlnkmgr) to
6-29.
6-29.
6-29.
8-7