Installing The Firmware/Configuration Files - Aastra 9143i Series Administrator's Manual

Installing the Firmware/Configuration Files

The following procedure describes how to install the firmware and configuration
files.
Step Action
1 If DHCP is disabled, manually enter the configuration server's IP address. For details on manually
setting DHCP, see Chapter 4, the section
2 Copy the firmware file <phone model>.st to the root directory of the configuration server. The IP
phone accepts the new firmware file only if it is different from the firmware currently loaded on the IP
phone.
Note: The <phone model> attribute is the IP phone model (i.e., 9143i.st, 9480i.st, 9480iCT.st, 51i.st,
53i.st, 55i.st, 57i.st, 57iCT.st).
3 Copy the Aastra configuration files (aastra.cfg and <mac>.cfg) to the root directory of the
configuration server.
Note: The <mac> attribute represents the actual MAC address of your phone.
(i.e., 00085D030996.cfg).
4 Note: Restart the IP phone as described in Chapter 3,
41-001160-03, Rev 00, Releaes 2.4
Firmware and Configuration Files
"DHCP" on page 4-4.
"Restarting Your Phone"
Overview
on page 3-13.
1-39