Mac Address/Line Number In Register Messages - Aastra 9143i Series Administrator's Manual

MAC Address/Line Number in REGISTER Messages

The IP phones can send the MAC address and line number in the REGISTER
packets making it easier for the call server when a user configures the phones via
the Aastra Web UI or the IP Phone UI. The following two configurable headers
send this information to the call server:
Aastra-Mac: <mac address>
Aastra-Line: <line number>
The MAC address is sent in uppercase hex numbers, for example,
00085D03C792. The line number is a number between 1 and 9.
The following parameters allow you to enable/disable the sending of MAC
address and line number to the call server:
• sip send mac
• sip send line
These parameters are disabled by default. The parameters are configurable via the
configuration files or the Aastra Web UI.
Configuring the MAC address/Line Number in REGISTER Message
Configuration Files
For specific parameters you can set in the configuration files for enabling/disabling MAC address and line
number, see Appendix A, the section,
41-001160-03, Rev 00, Releaes 2.4
"Advanced Operational Parameters"
Configuring Advanced Operational Features
Advanced Operational Features
on page A-233.
6-5