IP Phone Administrator Guide
Operational Features
Configuring Language Input Using the Configuration Files
An Administrator can specify the input language to use by entering a specific
parameter in the configuration files. An Administrator must enter the following
parameter to enable this feature:
•
input language
Use the following procedures to specify the input language to use on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Settings"
on
page A-162.
Configuring Language Input Using the IP Phone UI
Once "Language Input" is enabled, an Administrator or User can change the input
language on the phone using the IP Phone UI. The "Input Language" option
appears under the Language option in the IP Phone UI.
Example
Preferences
1. Tones
2. Contrast Level
3. Speed Dial Edit
4. Live Dialpad
5. Set Audio
6. Time and Date
7. Language
- Select
Language Option
5-44
Language
1. Screen Language
2. Input Language
- Select
Done -
Input Language Option
Input Language
1. English
2. Français
3. Español
4. Deutsch
5. Italiano
Done -
Languages Available
41-001160-03, Rev 00, Releaes 2.4
"Language
Cancel -
Done -