Aastra 9143i Series Administrator's Manual page 734

Sip ip phone

Hide thumbs Also See for 9143i Series:

Table of Contents

IP Phone Administrator Guide

Upgrading the Firmware

Aastra Web UI

In the "File Name" field, enter the firmware file name (<phone model>.st) that you want to download

to your IP phone. For example, 53i.st (for a 6753i phone).

Note: This file name must match the actual name of the firmware file residing on your configuration

IMPORTANT: The renamed 675xi phones still use the old naming convention for the .st files. See the

following table.

IP Phone Model

In the "Download Protocol" field, select the protocol from the list to use for downloading the new

firmware. Valid values are:

In the "Server" field, enter the IP address in dotted decimal format, of the TFTP configuration server,

or the domain name of the FTP, HTTP, or HTTPS configuration servers (dependant on the protocol

you selected in step 3.) For example: 432.221.45.6.

In the "Path" field, enter the path location on the protocol server for where the new firmware resides.

For example, C:\aastra\configserver\firmwareupgrade.

In the "Port" field, enter the port number of the protocol server. For example, 80 (for HTTP) or 443

(for HTTPS).

Note: This field is not applicable to the TFTP and FTP protocols.

(FTP only) In the "Username " field, enter the username that is used for authentication when the FTP

server is accessed.

Associated Firmware

41-001160-03, Rev 00, Releaes 2.4

Troubleshooting

9480i ct series 9480i series 675i series