Aastra 9143i Series Administrator's Manual page 816

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters
PC Port (Ethernet Port 1) Parameters
Parameter –
vlan id port 1
VLAN ID
(for PC Port in
Web UI)
Description
Format
Default Value
Range
Example
A-42
IP phone UI
Aastra Web UI
Configuration Files
Specifies the VLAN ID used to pass packets through to a PC via Port 1.
Note: If you set the VLAN id port 1 (passthrough port) to 4095, all
untagged packets are sent to this port. The following is an example of
configuring the phone on a VLAN where all untagged packets are sent to
the passthrough port.
Example
You enable tagging on the phone port as normal but set the
passthrough port (VLAN id port 1) to 4095. The following example
sets the phone to be on VLAN 3 but the passthrough port is
configured as untagged.
tagging enabled: 1
VLAN id: 3
VLAN id port 1: 4095
Integer
1
1 to 4095
VLAN id port 1: 3
Options->Administrator Menu->
Network Settings->VLAN->
Passthrough->VLAN ID
Advanced Settings->Network->VLAN->Port 1
aastra.cfg, <mac>.cfg
41-001160-03, Rev 00, Release 2.4