Aastra 9143i Series Administrator's Manual page 134

IP Phone Administrator Guide
Administrator Level Options
Parameter In
IP Phone UI
UPnP UPnP
N/A N/A
NAT IP NAT IP
NAT SIP Port NAT SIP Port
3-44
Parameter in
Aastra Web UI Configuration Files
upnp manager
upnp gateway
sip nat ip
sip nat port
Parameters in
Enables or disables Universal Plug
and Play (UpnP) on the IP phone. If
you set this parameter to "0", you
can manually configure NAT on the
IP phone and the UPnP manager
will not start.
For more information, see Chapter
4, "Universal Plug and Play (UPnP)
(for remote phones)"
IP address or fully qualified Domain
Name of the Internet gateway or
router. This parameter stores the IP
address of the gateway or router in
the event that only non-default
UPnP gateways get discovered on
the network. The UPnP port
mappings are saved to this IP
address so even if the phone
reboots, it will still have the correct
port mappings.
For more information, see Chapter
4, "Universal Plug and Play (UPnP)
(for remote phones)"
IP address the network device that
enforces NAT.
For more information, see Chapter
4, "Configuring NAT Address and
Port (optional)"
Port number of the network device
that enforces NAT.
For more information, see Chapter
4, "Configuring NAT Address and
Port (optional)"
41-001160-03, Rev 00, Releaes 2.4
Description
on page 4-50.
on page 4-50.
on page 4-35.
on page 4-35.