Audio Transmit And Receive Gain Adjustments - Aastra 9143i Series Administrator's Manual

Audio Transmit and Receive Gain Adjustments

The audio gain properties for the IP phone handset, headset, and speakerphone is
adjusted to reduce side-tone and echo on the local and far-end equipment. You can
adjust these settings from -10 db to +10 db to best suit your comfort level and
deployment environment by using the following parameters in the configuration
files:
• headset tx gain
• headset sidetone gain
• handset tx gain
• handset sidetone gain
• handsfree tx gain
• audio mode
The default setting for these parameters is 0 (zero).
The following table describes each parameter.
Parameter
Headset tx gain
Headset sidetone gain
Handset tx gain
Handset sidetone gain
41-001160-03, Rev 00, Releaes 2.4
Note: Aastra Telecom recommends you leave the default of 0 (zero) as
the settings for these parameters.
Description
The increased (+db) or decreased (-db) amount of signal transmitted from
the headset microphone to t he far-end party.
The increased (+db) or decreased (-db) amount of sidetone signal from the
headset microphone to the headset speaker.
The increased (+db) or decreased (-db) amount of signal transmitted from
the handset microphone to the far-end party.
The increased (+db) or decreased (-db) amount of sidetone signal from the
handset microphone to the handset speaker.
Configuring Operational Features
Operational Features
(continued)
5-357