Basic Settings - Aastra 9143i Series Administrator's Manual

Basic Settings

An Administrator has access to specific Basic Setting options to configure and
manage the IP Phone in the network. The following sections identify the options
available to an Administrator only, or where indicated, to a User and
Administrator. These tables also identify whether you can configure them using
the Aastra Web UI, IP Phone UI, or the configuration files.
General Settings
Parameter in
Aastra Web UI
Local Dial Plan
Send Dial Plan
Terminator
Digit Timeout
41-001160-03, Rev 00, Releaes 2.4
Parameter in
Configuration Files
sip dial plan
sip dial plan terminator
sip digit timeout
Administrator Level Options
Description
A dial plan that describes the number and pattern of
digits that a user dials to reach a particular telephone
number. Dial Plan field accepts up to 512 characters.
For more information on this feature, see
Plan" on page 5-53.
Allows you to enable or disable a dial plan terminator.
When you configure the dial plan on the phone to use
a dial plan terminator (such as the pound symbol (#)),
the phone waits 4 or 5 seconds after you pick up the
handset or after dialing the number on the keypad
before making the call.
For more information on this feature, see
Plan Terminator" on page
Represents the time, in seconds, to configure the
timeout between consecutive key presses.
For more information on this feature, see.
Timeout" on page 5-55.
Administrator Options
"Local Dial
"SIP Dial
5-55.
"Digit
3-19