Handset Feature Key Settings For The 9480I Ct And 6757I Ct - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters

Handset Feature Key Settings for the 9480i CT and 6757i CT

Parameter –
featurekeyN type
Type
(in Web UI)
Description
Format
Default Value
Range
A-214
Aastra Web UI
Configuration Files
The type of feature key to configure. Valid types are:
• none - Indicates feature key is disabled.
• line - Indicates the feature key is configured for line use.
• xfer- Indicates feature key is configured for transferring a call.
• conf - Indicates feature key is configured for conference calling.
• public - Indicates feature key is configured to toggle from public to
private mode. A public and private softkey can be used when at a line
item in the Directory List. The Private key toggles a number in the
Directory List to private. The Public key allows a number in the
Directory List to be sent to the handsets. A 6757i CT accepts a
maximum of 50 entries with the public attribute.
• icom - Indicates the feature key is set to be used to make an
intercom call.
• dir - Indicates the feature key is set for accessing the Directory List.
• callers - Indicates the feature key is set for accessing the Callers List.
• park- Indicates the feature key is configured to park incoming calls
when pressed.
• pickup- Indicates the feature key is configured to pick up parked calls
when pressed.
• flash - Indicates the feature key is set to generate a flash event when
it is pressed CT handsets. The IP phone generates flash events only
when a call is connected and there is an active RTP stream (for
example, when the call is not on hold).
Text
None
none
line
transfer
conference
public
icom
directory
callers ("Callers List" in Aastra Web UI)
park
pickup
flash
Operation->Handset Keys
aastra.cfg, <mac>.cfg
41-001160-03, Rev 00, Release 2.4