Configuring SIP and TLS Source Ports Using the Aastra Web UI
Use the following procedure to configure SIP and TLS source ports using the
Aastra Web UI.
Aastra Web UI
1
Click on Advanced Settings->Global SIP->Advanced SIP Settings.
.
"Local SIP UDP/TCP Port" Parameter
2
The "Local SIP UDP/TCP Port" field has a default value of 5060. Change this value if required to a
value greater than 1024 and less than 65535.
Note: It is recommended that you avoid the conflict RTP port range in case of a UDP transport.
41-001160-03, Rev 00, Releaes 2.4
Configuring Network and Session Initiation Protocol (SIP) Features
"Local SIP TLS Port" Parameter
Network Settings
4-39