Installing The Firmware/Configuration Files - Aastra SIP 53I Administrator's Manual

Sip ip phone release 2.1
Hide thumbs Also See for SIP 53I:
Table of Contents

Advertisement

Overview
Firmware and Configuration Files

Installing the Firmware/Configuration Files

The following procedure describes how to install the firmware and configuration
files.
Step
Action
1
If DHCP is disabled, manually enter the configuration server's IP address. For details on manually
setting DHCP, see Chapter 4, the section
2
Copy the firmware file <phone model>.st to the root directory of the configuration server. The IP
phone accepts the new firmware file only if it is different from the firmware currently loaded on the IP
phone.
Note: The <phone model> attribute is the IP phone model (i.e., 53i.st, 55i.st)
3
Copy the Aastra configuration files (aastra.cfg and <mac>.cfg) to the root directory of the
configuration server.
Note: The <mac> attribute represents the actual MAC address of your phone.
(i.e., 00085D030996.cfg).
4
Note: Restart the IP phone as described in Chapter 3,
41-001160-00, Release 2.1, Rev 04
"DHCP"
on
page
4-4.
"Restarting Your Phone"
on
page
3-13.
1-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sip 57i ct55i57i57i ct

Table of Contents