Aastra 9143i Series Administrator's Manual page 479

Configuring the BLF/Xfer Key and the Speeddial/Xfer Key Using the
Configuration Files
You use the following parameters in the configuration files to configure the
BLF/Xfer key and/or Speeddial/Xfer key on the IP Phone.
Softkey Parameters
softkeyN type
softkeyN label
softkeyN value
softkeyN line
softkeyN states
Top Softkey Parameters
topsoftkeyN type
topsoftkeyN label
topsoftkeyN value
topsoftkeyN line
Examples:
softkey1 type: speeddialxfer
softkey1 label: BX7801
softkey1 value: 7801
softkey1 line: 1
softkey1 states: idle connected incoming outgoing busy
prgkey1 type: blfxfer
prgkey1 value: 35
prgkey1 line: 1
Refer to the following in Appendix A to configure a BLF/Xfer and Speeddial/Xfer
key on the IP phone using the configuration files.
Configuration Files
To set a BLF/Xfer and Speeddial/Xfer key using the configuration files, see Appendix A,
Programmable Key/Feature Key/Expansion Module Key Parameters"
41-001160-03, Rev 00, Releaes 2.4
Programmable Key Parameters Expansion Module Parameters
prgkeyN type
prgkeyN value
prgkeyN line
Configuring Operational Features
Operational Features
expmodN keyN type
expmodN keyN label
expmodN keyN value
expmodN keyN line
"Softkey/
on page A-192.
5-181