Basic Settings - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Configuration Methods

Basic Settings

The Basic Settings section provides the following options:
Heading
Preferences
Account Configuration
2-14
Description
Allows you to set the following General specifications on the
IP phone.
• Local Dial Plan (Admin Only)
• Send Dial Plan Terminator (Admin Only)
• Digit Timeout (Admin Only)
• Park Call (not available on 9143i and 6753i)
• Pickup Parked Call (not available on 9143i and 6753i)
• Suppress DTMF Playback
• Display DTMF Digits
• Call Waiting
• Play Call Waiting Tone
• Stuttered Dial Tone
• XML Beep Support
• Status Scroll Delay
• Incoming Call Interrupts Dialing
• Switch Focus to Ringing Line
• Preferred Line
• Preferred Line Timeout (seconds)
• Goodbye Key Cancels Incoming Call
• UPnP Mapping Lines
• Message Waiting Indicator Line
• DND Key Mode
• Call Forward Key Mode
• Use LLDP ELIN
This section also allows you to set:
• Incoming Intercom Settings
• Outgoing Intercom Settings (Admin Only; Administrator
can enable these for a User if required)
• Group Paging RTP Settings
• Key Mapping (Admin Only)
• Ring Tones
• Priority Alert Settings (Admin Only)
• Directed Call Pickup Settings (Admin Only)
• Auto Call Distribution Settings (Admin Only)
• Time and Date Settings
• Language Settings (Only the Admin can specify the
language pack names to load to the phone). Both the
Admin and User can select the language type to display
for the Web UI.
Allows you to configure DND (Do Not Disturb) and/or Call
Forwarding by specific account or by all accounts. Also
allows you to enable/disable specific states for each
account, specify different phone numbers for call
forwarding, and specify number of rings for a "No Answer"
state.
41-001160-03, Rev 00, Releaes 2.4