Aastra 9143i Series Administrator's Manual page 60

IP Phone Administrator Guide
IP Phone Models
Keys
Softkeys - 12 softkeys on the 6757i IP Phone.
- 6 Top Keys: programmable static softkeys (up to 10 programmable functions)
- 6 Bottom Keys: programmable state-based softkeys (up to 20 programmable
functions)
By default, the top softkeys 1 through 4 are assigned as Services, Directory, Callers
List, and Intercom, respectively. Keys 5 and 6 have no assigned functions. All 6 keys
are programmable and can be assigned to perform specific functions.
The following are the default functions for the top softkeys on the 6757i IP phone:
1 - SERVICES
2 - DIRECTORY
3 - CALLERS LIST Accesses the last 200 calls received.
4 - ICOM
5 - NONE
6 - NONE
By default, the bottom softkeys 7 through 12 have no assigned functions. You can
configure all 6 bottom softkeys to perform specific functions on the 6757i IP phone.
However, after you lift the handset, there are specific static softkeys that display that
cannot be changed. These are as follows:
7- DIAL
8- CONF
9- XFER
Note: For more information about programming the softkeys to perform specific
functions, see
Programmable Keys/Feature Keys/Expansion Module Keys"
*See the Aastra 6757i or 6757i CT User Guide for more information about each of these keys.
1-30
Key Description
Accesses enhanced features and services such as XML
applications and voicemail, provided by third parties.
Displays up to 200 names and phone numbers (stored in
alphabetical order).
Accesses another extension on the network.
No assigned function.
No assigned function.
Allows you to dial out on the phone.
Begins a conference call with the active phone.
Transfers the active call to another number.
Chapter 5, "Configuring Operational Features" the section,
on page 5-141.
41-001160-03, Rev 00, Releaes 2.4
"Softkeys/