How It Works - Aastra 9143i Series Administrator's Manual

Variable
$$CALLDIRECTION$$
Note: This variable allows for
enhanced information in call
records and billing applications.
$$REGISTRATIONSTATE$$
$$REGISTRATIONCODE$$

How it works

When a startup, successful registration, incoming call, outgoing call,
offhook, or onhook call event occurs
the event has an action URI configured. If the phones finds a URI configured, any
variables configured (in the form $$VARIABLENAME$$) are replaced with the
value of the appropriate variable. After all of the variables are bound, the phone
executes a GET on the URI. The Action URI binds all variables and is not
dependant on the state of the phone.
For example, if you enter the following string for the action uri outgoing
parameter:
action uri outgoing: http://10.50.10.140/
outgoing.pl?number=$$REMOTENUMBER$$
and you dial out the number 5551212, the phone executes a GET on:
http://10.50.10.140/outgoing.pl?number=5551212
41-001160-03, Rev 00, Releaes 2.4
Description
Specifies whether the current/last call was incoming or outgoing. This
variable is associated with:
• onhook
Specifies the state of the phone's registration. Registration states can
be:
• registered
• unregistered
• expired
• refused
• timeout
Specifies the code generated during the registration process.
Registration code can be:
"xxx"
where xxx is the 3 digit code; for example, "403". Possible codes are:
• 001 (registration successful)
• 403 (registration failed)
Configuring Operational Features
Operational Features
on the phone, the phone checks to see if
5-329