Network Settings - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters

Network Settings

Parameter –
dhcp
DHCP
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
ip
Ip Address
(in Web UI)
Description
Format
Default Value
Range
Example
A-8
IP phone UI
Aastra Web UI
Configuration Files
Enables or disables DHCP. Enabling DHCP populates the required
network information. The DHCP server serves the network information
that the IP phone requires. If the IP phone is unable to get any required
information, then you must enter it manually. DHCP populates the
following network information:
IP Address, Subnet Mask, Gateway,, Domain Name Servers (DNS),
TFTP, HTTP, HTTP Port, HTTPS, HTTPS Port, and FTP servers, and
Timer Servers.
Note: For DHCP to automatically populate the IP address or qualified
domain name for the TFTP server, your DHCP server must support
Option 66.
Integer
1 (enabled)
0 (disabled)
1 (enabled)
dhcp: 1
IP phone UI
Aastra Web UI
Configuration Files
This parameter assigns a static IP address to the IP phone device.
Note: For DHCP to automatically populate this parameter, your DHCP
server must support Option 66.
IP address
0.0.0.0
Not Applicable
ip: 192.168.0.25
Options->Administrator Menu->
Network Settings
Advanced Settings->Network->
Basic Network Settings
aastra.cfg, <mac>.cfg
Options->Administrator Menu->
Network Settings
Advanced Settings->Network->
Basic Network Settings
aastra.cfg, <mac>.cfg
41-001160-03, Rev 00, Release 2.4