IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters
SIP Basic, Per-Line Settings
The following parameters are SIP per-line settings. The value of "N" is 1 - 9 for
9143i, 9480i, 9480i CT, 6753i, 6755i, 6757i, and 6757i CT.
SIP Per-Line Authentication Settings
Parameter –
sip lineN screen name
Screen Name
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
sip lineN screen name 2
Screen Name 2
(in Web UI)
Description
Format
Default Value
Range
Example
A-76
Aastra Web UI
Advanced Settings->Line 1 thru 9
Configuration Files
aastra.cfg, <mac>.cfg
Used to display text on the screen of the phone. You may want to set
this parameter to display the phone user's name.
Text
Not Applicable
Up to 20 alphanumeric characters
sip line1 screen name: Joe Smith
Aastra Web UI
Advanced Settings->Line 1 thru 9
Configuration Files
aastra.cfg, <mac>.cfg
Used to display text on a second line on the screen of the phone.
Notes:
1. If other status messages display on the phone, such as "Network
Disconnected", the Screen Name 2 value does not display.
2. Characters are allowed (such as "#").
3. If the text is longer than the display width, than the display truncates
the text to fit the display.
Alphanumeric characters
Not Applicable
Up to 20 alphanumeric characters
sip line1 screen name 2: Lab Phone
41-001160-03, Rev 00, Release 2.4