Display Dtmf Digits Setting - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters

Display DTMF Digits Setting

Parameter –
display dtmf digits
Display DTMF Digits
(in Web UI)
Description
Format
Default Value
Range
Example
A-174
Aastra Web UI
Configuration Files
Enables and disables the display of DTMF digits when dialing on the IP
phone.
DTMF is the signal sent from the phone to the network that you generate
when you press the phone's touch keys. This is also known as "touchtone"
dialing. Each key you press on your phone generates two tones of specific
frequencies. One tone is generated from a high-frequency group of tones
and the other from a low frequency group.
If enabled, this parameter displays the digits on the IP phone display if you
are dialing from the keypad, or from a softkey or programmable key. This
parameter is disabled by default (no digits display when dialing).
Boolean
0 (disabled)
0 (disabled)
1 (enabled)
display dtmf digits: 1
Basic Settings->Preferences->General
aastra.cfg, <mac>.cfg
41-001160-03, Rev 00, Release 2.4