IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters
Parameter –
sip customized codec
Customized Codec Preference
List
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
sip dtmf method
DTMF Method
(in Web UI)
Description
Format
Default Value
Range
Example
A-116
Aastra Web UI
Advanced Settings->Global SIP->RTP Settings
Configuration Files
aastra.cfg, <mac>.cfg
Specifies a customized Codec preference list which allows you to use
the preferred Codecs for this IP phone.
Comma-separated list of semicolon-separated values
Not Applicable
Valid values for the syntax are:
payload
ptime (in milliseconds)
silsupp
sip customized codec:
payload=8;ptime=10;silsupp=on,payload=0;ptime=10;
silsupp=off
Aastra Web UI
Advanced Settings->Global SIP->RTP Settings
Configuration Files
aastra.cfg, <mac>.cfg
Sets the Dual-tone multifrequency (DTMF) method to use on the IP
phone.
Boolean
0 (RTP)
0 (RTP)
1 (SIP INFO)
2 (BOTH)
sip dtmf method: 1
0 for G.711 m-Law
8 for G.711 a-Law
18 for G.729a
5, 10, 15, 20........90
on, off
41-001160-03, Rev 00, Release 2.4