Https Server Certificate Validation Settings - Aastra 9143i Series Administrator's Manual

HTTPS Server Certificate Validation Settings

Parameter–
https validate certificates
Validate Certificates
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter–
https validate expires
Check Certificate
Expiration
(in Web UI)
Description
Format
Default Value
Range
Example
41-001160-03, Rev 00, Release 2.4
Configuration Files
IP Phone UI
Aastra Web UI
Enables or disables the HTTPS validation of certificates on the phone.
When this parameter is set to 1, the HTTPS client performs validation on
SSL certificates before accepting them.
Note: If you are using HTTPS as a configuration method, and use a self
signed certificate, you must set this parameter to "0" (disabled) before
upgrading to Release 2.3 of the IP Phones.
Boolean
1 (enabled)
0 (disabled)
1 (enabled)
https validate certificates: 0
Configuration Files
IP Phone UI
Aastra Web UI
Enables or disables the HTTPS validation of the expiration of the certificates.
When this parameter is set to 1, the HTTPS client verifies whether or not a
certificate has expired prior to accepting the certificate.
Note: If the "https validate expires" parameter is set to enable, the clock on
the phone must be set for the phone to accept the certificates.
Boolean
1 (enabled)
0 (disabled)
1 (enabled)
https validate expires: 0
Operational, Basic, and Advanced Parameters
aastra.cfg, <mac>.cfg
Options->Administrator Menu->
Configuration Server->HTTPS Settings->
Cert Validation
Advanced Settings->Network->HTTPS Settings
aastra.cfg, <mac>.cfg
Options->Administrator Menu->
Configuration Server->HTTPS Settings->
Cert Validation->Check Expires
Advanced Settings->Network->HTTPS Settings
A-35