Aastra 9143i Series Administrator's Manual page 240

IP Phone Administrator Guide
Network Settings
IP Phone UI
Step Action
6 Select Type of Service SIP.
or
Select Type of Service RTP.
or
Select Type of Service RTCP.
7 Enter a value for "Type of Service SIP". Default is 26.
or
Enter a value for "Type of Service RTP". Default is 46.
or
Enter a value for "Type of Service RTCP". Default is 46.
Valid values are 0 to 63.
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table
page 4-56 For more information, see the section
8 Press Done (3 times) to save the changes.
Note: The session prompts you to restart the IP phone to apply the configuration settings
9 Select Restart.
4-58
"DSCP Range/VLAN Priority"
"Configuring VLAN (optional)"
41-001160-03, Rev 00, Releaes 2.4
on
on page 4-60.