Aastra 9143i Series Administrator's Manual page 239

The following table identifies the default DSCP of protocols.
Configuring Type of Service (ToS)/DSCP (optional)
Use the following procedures to configure ToS/DSCP on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
(ToS)/DSCP Settings" on
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2 Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4 Select Network Settings.
5 Select Type of Service DSCP.
41-001160-03, Rev 00, Releaes 2.4
Configuring Network and Session Initiation Protocol (SIP) Features
Protocol
Name
sip
rtp
rtcp
Note: ToS/DSCP is enabled by default. The SIP, RTP, and RTCP
parameters show defaults of 26, 46, and 46, respectively. Use the
following procedures to change these settings if required.
page A-44.
Default DSCP
Values in the
ToS Field
26
46
46
Network Settings
"Type of Service
4-57