Aastra 9143i Series Administrator's Manual page 533

On 9480i/9480i CT and 6757i/6757i CT
On the IP phone UI, the Park/Pickup feature displays the following:
• When a call comes in, and you pickup the handset, the custom label that you
configured for the Park softkey displays on the Phone UI.
• After the call is parked, the label that you configured for the Pickup softkey
displays on other phones in the network. You can then press the "Pickup"
softkey, followed by the applicable value to pickup the call on another phone
in your network.
• On the Model CTs, the customized labels apply to the base unit only. On the
Model CT handsets, pressing Ï displays the default labels of "Park" and
"Pickup".
On 9143i and 6753i
• When a call comes in, and you pickup the handset, you can press the
applicable "Park" programmable key to park the call.
• After the call is parked, you can press the "Pickup" programmable key,
followed by the applicable value to pickup the call.
You can configure a Park and Pickup key configuration using the configuration
files or the Aastra Web UI.
41-001160-03, Rev 00, Releaes 2.4
Note: On the 9480i/9480i CT and 6757i/6757i CT, the old softkey
labeled "Pickup" has been renamed to "Answer". This softkey uses the
old functionality - when you pickup the handset, you see a softkey labeled
"Answer". You can then press this key to pick up an incoming call. Do
no confuse this feature with the new Park/Pickup configuration feature.
Configuring Operational Features
Operational Features
5-235