Aastra 9143i Series Administrator's Manual page 979

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
Parameter –
prgkeyN value
Value
(in Web UI)
Description
Format
41-001160-03, Rev 00, Release 2.4
Aastra Web UI
Configuration Files aastra.cfg, <mac>.cfg
This is the value you assign to the programmable key.
The "prgkeyN value" parameter can be set for the following softkey types
only:
• speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial programmable key;
you then enter the rest of the number from the
keypad on the phone.)
• line
• blf
• sprecode
• dcp
• xml
• park
• pickup
• blf/xfer
• speeddial/xfer
• speeddial/conf
• paging
Notes:
1. For speeddial - Value is the phone number, extension, or prefix
number to enter for the programmable key.
2. For line - Value is optional; for example L4.
3. For blf - Value is the extension you want to monitor.
4. For sprecode - Value is dependent on services offered by server.
5. For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$LINESTATE$$
• $$LOCALIP$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$INCOMINGNAME$$
• $$CALLDURATION$$
• $$CALLDIRECTION$
6. For Park, Pickup - For valid values, see Chapter 5, the section,
"Park/Pickup Call Server Configuration Values"
Park/Pickup examples, see Chapter 5, the section
9143i Examples"
Integer
Operation->Programmable Keys
on page -237.
on page -238. For
"Model 6753i and
A-205