Directed Call Pickup (Blf Or Xml Call Interception) Settings - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters

Directed Call Pickup (BLF or XML Call Interception) Settings

Parameter –
directed call pickup
Directed Call Pickup
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
directed call pickup prefix
Directed Call Pickup by Prefix
(in Web UI)
Description
A-184
Aastra Web UI
Configuration Files
Enables or disables the use of "directed call pickup" feature.
Boolean
0 (disabled)
0 (disabled)
1 (enabled)
directed call pickup: 1
Aastra Web UI
Configuration Files
Allows you to enter a specific prefix string (depending on what is
available on your server), that the phone automatically dials when
dialing the Directed Call Pickup number.
For example, for Broadsoft servers, you can enter a value of *98 for the
"directed call pickup prefix". When the phone performs the Directed
Call Pickup after pressing a BLF or BLF/List softkey, the phone
prepends the *98 value to the designated extension of the BLF or BLF/
List softkey when dialing out.
Notes:
1. The default method for the phone to use is Directed Call Pickup over
BLF if the server provides applicable information. If the Directed Call
Pickup over BLF information is missing in the messages to the server,
the Directed Call Pickup by Prefix method is used if a value for the prefix
code exists in the configuration.
2. You can define only one prefix at a time for the entire BLF/List.
3. The phone that picks up displays the prefix code + the extension
number (for example, *981234 where prefix key = *98, extension =
1234).
4. Symbol characters are allowed (for example "*").
Basic Settings->Preferences
->Directed Call Pickup Settings
aastra.cfg, <mac>.cfg
Basic Settings->Preferences->
Directed Call Pickup Settings
aastra.cfg, <mac>.cfg
41-001160-03, Rev 00, Release 2.4