Time Server Settings - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters

Time Server Settings

Parameter –
time server disabled
NTP Time Servers
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
time server1
Time Server 1
(in Web UI)
Description
Format
Default Value
Range
Example
A-52
Aastra Web UI
IP Phone UI'
Configuration Files
Enables or disables the time server. This parameter affects the time
server1, time server2, and time server3 parameters. Setting this
parameter to 0 allows the use of the configured Time Server(s). Setting
this parameter to 1 prevents the use of the configured Time Server(s).
Note: For DHCP to automatically populate this parameter, your DHCP
server must support Option 66.
Integer
0 (disabled)
0 (disabled)
1 (enabled)
time server disabled: 0
Aastra Web UI
IP Phone UI'
Configuration Files
The primary time server's IP address or qualified domain name. If the
time server is enabled, the value for time server1 will be used to request
the time from.
Note: For DHCP to automatically populate this parameter, your DHCP
server must support Option 66.
IP address or qualified domain name
0.0.0.0
Not Applicable
time server1: 192.168.0.5
Basic Settings->Preferences->
Time and Date Settings
Options->Preferences->
Time and Date->Time Servers
aastra.cfg, <mac>.cfg
Basic Settings->Preferences->
Time and Date Settings
Options->Preferences->
Time and Date->Time Servers
aastra.cfg, <mac>.cfg
41-001160-03, Rev 00, Release 2.4