Firmware/Configuration Files; Configuration Methods; Installing The Firmware/Configuration Files - Aastra 480i Administrator's Manual

For setting up your configuration
server as a TFTP server, see
"Appendix A: Configuration
Server Protocol Setup."
Firmware/Configuration
Files
When the IP phone is initialized
for the first time, DHCP is enabled
by default. Depending on the type
of configuration server setup you
may have, the IP phone may
download a firmware version and
configuration files automatically,
or you may need to download it
manually.
Note: Automatic download is depen-
dant on your configuration
server setup.
The firmware consists of a single
file called:
• <phone model>.st
The configuration files consist of
two files called:
• aastra.cfg
• <mac>.cfg
The following table provides the
firmware for each Aastra IP phone
model.
IP Phone Associated
Model Firmware
480i 480i.st
480i CT 480i Cordless.st
9112i 9112i.st
9133i 9133i.st

Configuration Methods

You can use the following to setup
and configure the IP phone:
• IP phone UI
• Aastra Web UI
• Configuration files
Models 480i and 480i CT have 18
softkeys available to configure the
IP phone. Model 9133i has 7
programmable keys. Model 9112i
has 2 programmable keys.
4 IP Phone SIP Admin Guide
Reference
For setting up and configuring the
IP phone using either the IP phone
UI, the Aastra Web UI, or the
configuration files, see
"Configuring the IP Phone"
page12.
For information about the softkey
and programmable key
parameters, see "Softkey/
Programmable Key Settings"
page87.
Installing the Firmware/
Configuration Files
The following procedure describes
how to install the firmware and
configuration files.
To install firmware/configuration
files:
1 If DHCP is disabled, manually
enter the configuration server's
IP address. For details on setting
DHCP, see "DHCP" on
2 Copy the firmware file
<phone model>.st to the root
directory of the configuraton
server. This firmware file is
downloaded only if it is differ-
ent from the firmware currently
loaded on the IP phone.
Note: The <phone model> attribute is
the IP phone model (i.e., 480i.st,
9133i.st)
3 Copy the Aastra configuration
files (aastra.cfg and <mac>.cfg)
to the root directory of the con-
figuration server.
Note: The <mac> attribute represents
the actual MAC address of your
phone.
(i.e., 00085D030996.cfg ).
on
on
page12 .