Aastra 9143i Series Administrator's Manual page 144

IP Phone Administrator Guide
Administrator Level Options
Parameter In
IP Phone UI
PC Port Settings (Port 1)
PC Port VLAN ID VLAN ID
PC Port Priority Priority
3-54
Parameter in
Aastra Web UI Configuration Files
VLAN id port 1
QoS eth port 1 priority
Parameters in
Specifies the VLAN ID used to pass
packets through to a PC via Port 1.
Note: If you set the PC Port VLAN
ID (Port 1) to 4095, all untagged
packets are sent to this port. The
following is an example of
configuring the phone on a VLAN
where all untagged packets are sent
to the passthrough port.
Example
You enable tagging on the LAN Port
(VLAN id) as normal but set the PC
Port (VLAN id port 1) to 4095. The
following example sets the phone to
be on VLAN 3 on the LAN Port but
the PC Port is configured as
untagged.
tagging enabled: 1
VLAN id: 3
VLAN id port 1: 4095
For more information, see Chapter
4, "Virtual LAN (optional)"
page
Specifies the priority value used for
passing VLAN packets through to a
PC via Port 1.
For more information, see Chapter
4, "Virtual LAN (optional)"
page
41-001160-03, Rev 00, Releaes 2.4
Description
on
4-54.
on
4-54.