Time And Date - Aastra 9143i Series Administrator's Manual

Time and Date

In addition to enabling/disabling the time server, you can also set the time and
date, set the time and date format, set the time zone, and set daylight savings time
on the IP phones. You configure these features using the configuration files, the IP
Phone UI, or the Aastra Web UI. The following table identifies which method of
configuration applies to each feature.
Feature
Set Time
Set Time Format
Set Date
Set Date Format
Set Time Zone
Set Daylight Savings Time
Daylight Savings Time (DST) Information
The Aastra IP Phones incorporate the federally mandated DST observance
change. This change became affective starting in 2007.
The US has made a change to its daylight savings time observance starting in
2007. The Energy Policy Act of 2005 mandates that DST will now begin at 2:00
A.M. on the second Sunday in March and revert to Standard time on the first
Sunday in November.
The changes to daylight savings time applies to the U.S. and Canada, but may
impact other countries outside North America.
41-001160-03, Rev 00, Releaes 2.4
Note: In previous years, the DST began on the first Sunday of April and
ended on the first Sunday of October.
Configuring Operational Features
Operational Features
Method of configuration
IP Phone UI
Configuration Files
IP Phone UI
Aastra Web UI
IP Phone UI
Configuration Files
IP Phone UI
Aastra Web UI
IP Phone UI
Configuration Files
IP Phone UI
Configuration Files
5-19