Basic Network Settings - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Administrator Level Options

Basic Network Settings

If Dynamic Host Configuration Protocol (DHCP) is enabled, the IP phone
automatically configures all of the Network settings. If the phone cannot populate
the Network settings, or if DHCP is disabled, you can set the Network options
manually.
Parameter In
IP Phone UI
DHCP DHCP
IP Address IP Address
3-38
Parameter in
Aastra Web UI Configuration Files
dhcp
ip
Parameters in
Enables or disables DHCP.
Enabling DHCP populates the
required network information. The
DHCP server serves the network
information that the IP phone
requires. If the IP phone is unable to
get any required information, then
you must enter it manually. DHCP
populates the following network
information:
IP Address, Subnet Mask, Gateway,
Domain Name Servers (DNS),
TFTP, HTTP HTTPS, and FTP
servers, and Timer Servers.
Note: For DHCP to automatically
populate the IP address or qualified
domain name for the TFTP server,
your DHCP server must support
Option 66. The IP phones also
support Option 60 and 43.
For more information, see
on
IP address of the IP phone. To
assign a static IP address, disable
DHCP.
For more information, see
"Configuring Network Settings
Manually"
41-001160-03, Rev 00, Releaes 2.4
Description
"DHCP"
page 4-4.
on page 4-24.