Incoming Call Interrupts Dialing Setting - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters

Incoming Call Interrupts Dialing Setting

Parameter –
incoming call cancels dialing
Incoming Call Interrupts
Dialing
(in Web UI)
Description
A-146
Aastra Web UI:
Configuration Files
Enables or disables how the phone handles incoming calls while the
phone is dialing out.
When you enable this parameter (1 = true), an incoming call interrupts the
outgoing call during dialing and allows the phone to ring for the user to
answer the incoming call.
When you disable this parameter (0 = disable), which is the default, the
phone does not interrupt the outgoing call during dialing and the number
you were dialling continues to display in the LCD. The phones sends the
incoming call to a free line on the phone (or sends busy signal if all
remaining lines are busy) and the LED for that line blinks. You have a
choice to ignore the incoming call, or answer the incoming call on another
line, via the Ignore and Answer softkeys that display. If you choose to
answer the incoming call, you can answer the call, finish the call, and then
hang up. You can still go back to the original outgoing call and finish
dialing out.
Notes:
1. On a 9143i, 6751i, and 6753i, you must use the up and down arrow
keys to ignore or answer the call.
2. On all phone models, if you disable this parameter (0=disable), and the
phone receives an incoming call while you are dialing an outgoing call,
you can pick up the call and perform transfer or conference as required.
After enabling or disabling this feature, it takes affect on the phone
immediately.
Basic Settings->Preferences->General
aastra.cfg, <mac>.cfg
41-001160-03, Rev 00, Release 2.4