Aastra 9143i Series Administrator's Manual page 968

IP Phone Administrator Guide
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
Format
Default Value
A-194
• webapps - Indicates the softkey is hardcoded to access an Aastra
XML-based application (xml.myaastra.com). By default, Softkey 1 is
assigned as the WebApps key on the 9480i, 9480i CT, 6755i, 6757i,
and 6757i CT. (Not applicable to the CT handsets). Also accessible
from the Services menu on these phones.
• flash - Indicates the softkey is set to generate a flash event when it is
pressed, or a feature key is pressed on the CT handsets. The IP
phone generates flash events only when a call is connected and there
is an active RTP stream (for example, when the call is not on hold).
• sprecode - Indicates the softkey is configured to automatically
activate specific services offered by the server. For example, if the
sprecode value of *82 is configured, then by pressing the softkey, *82
automatically activates a service provided by the server.
• park - Indicates the softkey is configured to park incoming calls when
pressed.
• pickup - Indicates the softkey is configured to pick up parked calls
when pressed.
• lcr - Indicates the softkey is configured for "last call return" when
pressed.
• call forward - Indicates the softkey is configured for accessing the
Call Forward features on the phone. A Call Forwarding Mode must be
enabled to use this softkey. "Account" mode is the default.
• blf/xfer - Indicates the softkey is configured to transfer calls AND
configured for BLF on a single key.
• speeddial/xfer - Indicates the softkey is configured to transfer calls
AND configured for speeddialing to a specific number.
• speeddial/conf - Indicates the softkey is configured to be used as a
speeddial key AND as a conference key.
• dir - Indicates the softkey is set for accessing the Directory List.
• callers - Indicates the softkey is set for accessing the Callers List.
• icom - Indicates the softkey is set to be used as the Intercom key.
• services - Indicates the softkey is set to be used as the Services key.
• phonelock - Indicates the softkey is set to be used to lock/unlock the
phone.
• paging - Indicates the softkey is set for Group Paging on the phone.
Pressing this key automatically sends a Real Time Transport Protocol
(RTP) stream to pre-configured multicast address(es) without
involving SIP signaling.
• empty - Indicates the softkey is configured to force a blank entry on
the IP phone display for a specific softkey.
The softkeys are added in order (from softkey1 to softkey20) after any
hard-coded keys have been added. If a particular soft key is not defined,
it is ignored.
Text
none
41-001160-03, Rev 00, Release 2.4