Group Paging Rtp Settings - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Administrator Level Options

Group Paging RTP Settings

Parameter in
Aastra Web UI
Paging listen addresses
Note: This option can
be set by both Users
and Administrators.
Key Mapping
Parameter in
Aastra Web UI
Map Redial Key To
Map Conf Key To
3-26
Parameter in
Configuration Files
paging addr list
Parameter in
Configuration Files
map redial key to
map conf key to
Description
Allows you to specify up to 5 listening multicast
addresses to send/receive a Real Time Transport
Protocol (RTP) stream to/from these pre-configured
multicast address(es) without involving SIP signaling.
For more information on this feature, see
Paging RTP Settings" on
Description
Sets the Redial key as a speeddial key if a value is
entered for this parameter. If you leave this parameter
blank, the Redial key returns to its original
functionality.
Note: If you configure the Redial key for speeddialing
on the 9480i CT or 6757i CT Base Stations, the Redial
key on the 9480i CT and 6757i CT handsets retain
their original functionality. The Redial key on the
handset is not configured for speeddial.
For more information on this feature, see
Mapping" on page 5-113.
Sets the Conf key as a speeddial key if a value is
entered for this parameter. If you leave this parameter
blank, the Conf key returns to its original functionality.
Note: If you configure the Conf key for speeddialing
on the 9480i CT or 6757i CT Base Stations, the Conf
key on the 9480i CT and 6757i CT handsets retain
their original functionality. The Conf key on the
handset is not configured for speeddial.
For more information on this feature, see
Mapping" on page 5-113.
41-001160-03, Rev 00, Releaes 2.4
"Group
page 5-107.
"Key
"Key