Basic information about the drive system
12.6 Parameterizing using the BOP20 (Basic Operator Panel 20)
Function diagrams (see SINAMICS S List Manual)
● 9106 Analog outputs (AO 0 and AO 1)
● 9572 Analog outputs (AO 0 and AO 1)
12.6
Parameterizing using the BOP20 (Basic Operator Panel 20)
12.6.1
General information about the BOP20
With the BOP20, drives can be powered-up and powered-down during the commissioning
phase and parameters can be displayed and modified. Faults can be diagnosed as well as
acknowledged.
The BOP20 is snapped onto the Control Unit; to do this the dummy cover must be removed
(for additional information on mounting, please refer to the Equipment Manual).
Overview of displays and keys
Figure 12-14 Overview of displays and keys
490
NOTICE
Parameters p4077 to p4080 of the scaling do not limit the voltage values/current values
(for TM31, the input can be used as current input).
Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4
Drive Functions