Siemens SINAMICS S120 Function Manual page 28

Infeed
1.1 Active Infeed
Switching on the Active Line Module:
Figure 1-3
Note
Under the condition that the drive system was commissioned with STARTER and no
PROFIdrive telegram was activated, the infeed can be powered-up by issuing an enable
signal at the EP terminals and a positive signal edge at OFF1 (p0840).
Switching off the Active Line Module
To switch off the Active Line Module, carry out the steps for switching it on in reverse order.
28
Active Infeed power-up
Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4
Drive Functions