Value display
To switch from the parameter display to the value display, press the "P" key. In the value
display, the values of the adjustable parameters can be increased and decreased using the
arrow. The cursor can be selected using the "FN" key.
Figure 12-16 Value display
Example: Changing a parameter
Precondition: The appropriate access level is set
(for this particular example, p0003 = 3).
Drive Functions
Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4
12.6 Parameterizing using the BOP20 (Basic Operator Panel 20)
Basic information about the drive system
495