Siemens SINAMICS S120 Function Manual page 397

Error
value
0x15 Response too long
0x16 Illegal parameter address
0x17 Illegal format
0x18 No. of values inconsistent
0x19 Drive object does not exist
0x65 Presently deactivated.
0x6B Parameter %s [%s]: no write access
for the enabled controller
0x6C Parameter %s [%s]: unit unknown
0x6D Parameter %s [%s]: Write access
only in the commissioning state,
encoder (p0010 = 4).
0x6E Parameter %s [%s]: Write access
only in the commissioning state,
motor (p0010 = 3).
0x6F Parameter %s [%s]: Write access
only in the commissioning state,
power unit (p0010 = 2).
0x70 Parameter %s [%s]: Write access
only in the quick commissioning
mode (p0010 = 1).
0x71 Parameter %s [%s]: Write access
only in the ready mode (p0010 = 0).
0x72 Parameter %s [%s]: Write access
only in the commissioning state,
parameter reset (p0010 = 30).
0x73 Parameter %s [%s]: Write access
only in the commissioning state,
Safety (p0010 = 95).
0x74 Parameter %s [%s]: Write access
only in the commissioning state, tech.
application/units (p0010 = 5).
0x75 Parameter %s [%s]: Write access
only in the commissioning state
(p0010 not equal to 0).
0x76 Parameter %s [%s]: Write access
only in the commissioning state,
download (p0010 = 29).
0x77 Parameter %s [%s] may not be
written in download.
Drive Functions
Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4
Meaning
Communication PROFIBUS DP/PROFINET IO
10.1 Communications according to PROFIdrive
Comment
The length of the present response exceeds the maximum
transfer length.
Impermissible or unsupported value for attribute, number
of elements, parameter number, subindex or a
combination of these.
Write request: illegal or unsupported parameter data
format
Write request: a mismatch exists between the number of
values in the parameter data and the number of elements
in the parameter address.
You have attempted to access a drive object that does not
exist.
You have tried to access a parameter that, although
available, is currently inactive (e.g. n control set and
access to parameter from V/f control).
–
–
–
–
–
–
–
–
–
–
–
–
–
Additional
info
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
397