Commissioning Of The Profibus Slave-To-Slave Communication - Siemens SINAMICS S120 Function Manual

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Communication PROFIBUS DP/PROFINET IO

10.2 Communication via PROFIBUS DP

Commissioning of the PROFIBUS slave-to-slave communication

The commissioning of slave-to-slave communication between two SINAMICS drives using

the additional Drive ES Basic package is described below.

Settings in HW Config

The project below is used to describe the settings in HW Config.

Figure 10-32 Example project of a PROFIBUS network in HW Config

1. Select a slave (e.g. CU320) and use its properties to configure the telegram for the

connected drive object.

2. In the "Configuration" tab of the drive unit, select e.g. the standard telegram 2 for the

associated servo or vector drive in the telegram selection.

Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4

Drive Functions

Show Quick Links

Table of Contents