Sewing Test According To Pattern - Duerkopp Adler 745-34 Service Instructions Manual

13.8 Sewing test according to pattern

Pocket opening line
z.B.: PL1 = 60 - 5 = 55
Pz = Flap cut
PT = Flap depth
The settings according to these service instructions are followed by the
adjustment as per pattern with a correspondingly prepared workpiece
(light-coloured fabric).
3 2
–
Draw vertical and horizontal lines on flap 2 and on the workpiece.
–
Position the piping strip on the rest table.
–
Position the flap 2 at the laser marking 1 aligned in parallel
position. Adjust the laser marking in such a way that the flap
projects from the pocket opening line to the right by the spacing
PL1.
(see sketch opposite for determination of same)
–
Align the workpiece.
The horizontal and vertical lines of the workpiece and the flap must
be congruent.
–
Carry out the sewing operation.
–
Take the workpiece off and turn.
–
Check the workpiece and correct faulty sewing results.
(see chapter 13.8)
2
L1
125