33.18 Input Test
One can test individual inputs in this menu.
When you are in the service menu, sequentially select the following
–
menu items with the arrow keys and the "OK" key:
- Test Functions
- Multitest
- Input Test
The " Input Test " menu appears.
Select the desired input with the up and down arrow keys. The
–
current status of the input is shown behind the input number:
-
= Input not activated
+
= Input activated
Manually move that part of the automatic sewing machine which
–
triggers the appropriate input.
The status of the input changes as soon as the input is operated.
–
Input
Designation
S01
Looper thread monitor
S02
Needle thread monitor
S08
Depending on subclass left or right needle penetration
S09
Pressure monitor
S10
Hand switch key "1"
S11
Hand switch key "2"
S13-S16
Pedal
S18
Switch "Safe Stop"
S24
Buttonhole cut
S25
Reference switch sewing mechanism rotation
S26
Reference switch lengthwise movement
S27
Reference switch-crosswise movement
3
71