Main Menu; Seam Pattern Operation - Duerkopp Adler 510 Operating Instructions Manual

8.5 Main menu

8.5.1

Seam pattern operation

22
The parameters for the individual seam patterns are arranged in the
main menu.
The seam patterns can be altered via these parameters.
–
Switch on main switch.
The control is initialized.
The main menu appears.
–
Select desired parameter with the keys "ñ" or "ò".
The symbol of the selected parameter is displayed white on black.
–
Alter selected parameter as described in chapter 8.3.
Menu item
The symbol in the top left corner of the display describes
the currently selected menu item.
Bartack pattern
The symbol down on the left of the display shows the
current bartack pattern.
Seam pattern
Via this parameter the seam pattern to be sewn
is selected.
Selection: 1 .. 51 (52 to 99 if available)
Speed
Via this parameter the desired speed is set.
Input:
Submenu seam pattern dimension
Select the present menu to set the seam pattern length
and width.
Display:
Submenu seam pattern offset
Select the present menu to shift the seam pattern offset in
X-/Y-direction.
Display:
0 to 2700 rpm
present length/width
present X-/Y- offset value