Image/Operation Checks And User Mode - Canon NP6260 Service Manual

CHAPTER 9 INSTALLATION
J. Image/Operation Checks and User Mode
Step
1 Connect the power plug to the power
outlet, and insert the door switch
actuator into
assembly of the front door.
2 Slide out the holding tray and the
holding tray feeding assembly, and
check to make sure that the parts are
not damaged or soiled with foreign
matter.
3 Slide out the paper deck and the
cassette to the front, and remove the
packing materials.
4 Fit the side guide plate of cassette 4
using the hole with the marking
(A4/A3).
Install the size protect tab that comes
with the machine working from inside
the cassette so that the hole with the
marking A (STRMT-R) and the hole
with the marking H (LTR-R) are out
of view.
Caution:
Skip this step if you are using
Inch-configured paper.
5 Turn on the power.
9-26
COPYRIGHT © 1997 CANON INC.
Work
the door switch
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Caution:
Be sure to remove all packing materials
before turning on the power.
Size protect tab
• Adjust the contrast of the control panel using
the Display contrast key for better viewing.
(Advise the user how to use the key.)
• Check that the Add Paper indicator turns on.
• Enter a number (keypad) to check that the
copy count display is correct. (Press the
Clear key thereafter.)
Marking A
Marking H