Removing The Feeding Roller; Removing The Separation Roller - Canon NP6260 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM

3. Removing the Feeding Roller

1) Remove the left deck pick-up
assembly from the copier.
2) Remove the stop ring
remove the feeding roller
er with the timing belt

4. Removing the Separation Roller

1) Remove the left deck pick-up
assembly from the copier.
2) Remove the mounting screw
detach the
assembly from the joint
3) Remove the separation roller
from the separation roller shaft
mount.
Note:
Take care not to lose the pin from
the roller.
Note:
The urethane sponge used on the
roller is initially pink and changes to
yellow over time, accelerated by
exposure to light (pink to orange,
and then to yellow).
The fact is common to all urethane
sponge types, and will not affect its
physical performance. Keep in mind
that color difference, if any, does not
indicate different part types.
5-86
COPYRIGHT © 1997 CANON INC.
; then,
togeth-
.
, and
separation roller
.
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 5-852
Figure 5-853
Figure 5-854