CHAPTER 6 FIXING SYSTEM
17. Removing the Sub Thermistor
(TH2)
1) Slide out the fixing/feeding unit from
the copier.
2) Remove the screw
the fixing assembly upper cover
then, remove the screw
remove the harness cover
3) Remove the screw
the sub thermistor unit
Caution:
The sub thermistor cannot be
replaced in the field. Replace it as
part of the sub thermistor unit
shown in Figure 6-231.
6-32
COPYRIGHT © 1997 CANON INC.
, and remove
;
, and
.
, and remove
.
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 6-230
Figure 6-231