Cleaning The Cleaner Side Scraper - Canon NP6260 Service Manual

6. Cleaning the Cleaner Side Scraper

Perform the following steps whenever you have replaced the cleaning blade (every
500,000 copies).
1) Remove the cleaning blade.
2) Remove the paper lint collecting at the tip of the side scraper (gap
magnet roller and toner guide roller) with tweezers.
3) Remove the toner coated on the surface of the magnet roller. (Shape copy paper into
the letter U, and scoop up the toner.)
COPYRIGHT © 1997 CANON INC.
Side scraper (rear)
Toner guide roller
A
Remove waste toner collecting here.
Figure 11-224 (rear)
Remove waste toner collecting here.
A
Toner guide roller
Side scraper (front)
Figure 11-224a (front)
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
Magnet roller
(rear)
4~8mm
4~8mm
(front)
Magnet roller
between
11-21