Making Two-Sided Copies (2Nd Side) - Canon NP6260 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
B. Making Two-Sided Copies (2nd side)
When copying on the second side of a two-sided copy, pick-up occurs on the hold-
ing tray.
When the Copy Start key is pressed, the bottommost sheet of the stack of copy paper
on the holding tray is moved to the holding tray registration roller as the holding tray
separation clutch (CL6) and the holding tray re-pick up roller solenoid (SL6) turn on in
response to the movement of the sheet.
The leading edge of the sheet butts against the holding tray registration roller, and
the sheet arches; then, it is set to the holding tray feeding assembly as soon as the hold-
ing tray registration clutch (CL3) turns on.
The copy paper is then sent to the registration roller through the holding tray feeding
assembly.
Holding tray
registration roller
PS17
PS14
CL3
5-26
COPYRIGHT © 1997 CANON INC.
PS20
PS19
CL6
PS9
DC controller PCB
Figure 5-603
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
PS23
SL6
Holding tray
PS8
feeding
assembly
CL1
CL2
PS33
Pick-up motor
M2