Canon NP6260 Service Manual page 111

3) Remove the lens hood.
4) Remove the mounting screw of the
Y direction cable metal clamp; then,
fix the end of the Y direction cable
temporarily in place.
5) Remove the mounting screw
and remove the light-blocking belt
retainer (on lens mount).
6) Remove the mounting screw
and remove the light-blocking cur-
tain 2 (front)
holder. (Fix the light-blocking belt
mount temporarily in place with tape
to the lens stage.)
7) Lift the lens stage
the bushing
COPYRIGHT © 1997 CANON INC.
together with the
, and detach
from the rail .
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
,
,
CHAPTER 3 EXPOSURE SYSTEM
Figure 3-518
+
Figure 3-519
Figure 3-520
3
4
3-33