Removing The Thermal Fuse; Standard White Plate - Canon NP6260 Service Manual

2. Removing the Thermal Fuse

1) Remove the copyboard glass retain-
er, and remove the copyboard.
2) Remove the control panel.
3) Remove the scanning lamp.
4) Move the No. 1 mirror mount to the
right end.
5) Remove the two mounting screws
, and remove the thermal fuse
B. Standard White Plate
1) Remove the RDF.
2) Remove the rear cover.
3) Remove the two mounting screws
, and remove the copyboard glass
right retaining plate
4) Remove the two stepped screws
(M3x3), and remove the standard
white cover .
COPYRIGHT © 1997 CANON INC.
.
.
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
Figure 4-303
Figure 4-304
Figure 4-305
4-41